13
Instructions for the installer
7.3.1 Supporting base
Make two openings in the rear part of the base as described in the figure
below. The left opening must be used for gas connections, and the right
one for electrical connections. Before securing the hob to the supporting
base, make 4 holes 8mm in diameter at the indicated points through
which the screws will pass that are to be secured into the rivets in the
bottom part of the product.
The interaxes of the holes and the dimensions of the openings refer to a
hob installed against the back wall.
681 mm
681 mm
355 mm
189.5 mm
96 mm
200 mm
434 mm
120 mm
83.5 mm
Ø 8 mm
Ø
8
m
m
Ø
8
m
m
Ø
8
m
m
109. mm
5
Z
83.5 mm
