2. INSTALLATION
Preparation
1. The cooker hood should be placed at a distance of 65-75cm (26-30inch)
from the cooking surface for the best effect.
2. Drill a hole in the cupboard, 570*265(mm) for model PUM601X and
865*265(mm) for model PUM901X. Make sure the distance between the
edge of the hole and the edge of the cupboard edge is at least 35mm.
3. Take off the filter and the two lamps. Remove the two screws on the panel.
And then take off the panel.
Installation
Method 1
1. Use four ST4*8mm screws to fix the mounting bracket onto the hood. Then
put two ST4*30mm screws into the wall. Hang the hood onto the wall.
2. Use ST4*14mm screws to tighten the hood to the cabinet. PUM601X needs
ten screws. PUM901X needs twelve screws.
3
