User instructions
16
OPTIONS
(available in all programs except the soak program)
The options are controlled by the
OPTION
SELECTION
button
(3)
.
Press the button to access the procedure,
confirmed by flashing of one of the
OPTIONS
lights
(E).
N.B.:
The
PROGRAM DELAY light
only comes on when the specific
PROGRAM DELAY
button
(5)
is pressed.
Press the
SELECT OPTIONS
button
(5)
again to display the next option. To
confirm an option, press the
CONFIRM OPTION button
(6)
(the light stops
flashing and remains on). This operation can be carried out for one or all of
the options available. To deactivate an option which has already been
confirmed, press the
OPTION SELECTION
button
(3)
until the
OPTION
LIGHT
required flashes, and press the
CONFIRM OPTION
button
(6)
. The
light stops flashing and goes out.
All options
except "3in1"
are
disabled
at the end of the wash cycle.
"3/1"
The option is optimised for use of detergents which are complete with
salt and rinse aid, known on the market as "3 in 1", "triple action", etc.
With this option activated, any salt and rinse aid If you wish to use
detergents which already contain salt and rinse aid already in the
dishwasher will not be used.
- N.B.:
even with the "
3/1"
option selected, the regenerating
salt/rinse aid lights will still stay on if their containers are empty.
IMPORTANT:
when no longer required, the option must be
disabled
(the light goes out).
If the water hardness has been set on a value above H3, and the “3/1”
option is activated, the relative light flashes, warning of a setting error.
3in1 products are not suitable for use with very "hard" water; this does
not prevent the use of the option, but the washing results might not be
of the best.
HYCLEAN
Increases the temperature of the final hot rinse to 70°C to ensure a further
reduction in the bacteria level. If the temperature in the tank falls during this
stage of the program (e.g. because the door is opened or due to a power
blackout), the light of the option and the program lights flash to warn that the
additional washing phase has not been completed successfully. This does
not mean that the wash program has been less effective than usual.
Summary of Contents for PLA6445B
Page 2: ......
