background image

Contents

1.  Safety and operating instructions ___________________________ 2

2. Installation 

and 

hook-up 

__________________________________ 5

3.  Description of the controls________________________________ 8

4. Operating 

instructions ___________________________________ 18

5.  Cleaning and maintenance _______________________________ 28

6. Troubleshooting 

_______________________________________ 32

Thank you for choosing this product.
We advise you to carefully read all the instructions contained in this
manual, in order to understand how to operate your dishwasher safely
and correctly.
The manual is divided into paragraphs, which provide a step by step
description of the dishwasher functions, with clear instructions
accompanied by detailed illustrations.
Recommendations are given for the correct use of the baskets, spray
arms, containers, filters, washing programs, and for operating the
controls.
Follow the recommended cleaning procedures to ensure that your
dishwasher always remains in perfect working order.
This manual provides a quick and easy reference for answering all your
questions concerning the use of your new dishwasher.

INSTALLATION INSTRUCTIONS: these are intended for the 

qualified

technician

 who must carry out the installation, hook-up and testing of

the appliance.

USER INSTRUCTIONS: these consist of recommendations for using the
appliance, a description of its controls and of the correct cleaning and
maintenance procedures.

1

Summary of Contents for PL8210X




































Reviews: