Installation
50
5 Installation
5.1 Safety instructions
Veneers, adhesives or plastic coatings on
adjacent furniture should be temperature-
resistant (
>90°C
), otherwise they might
warp over time.
The minimum clearances must also be
respected for the edges of the hob on the
back as indicated in the mounting
illustrations.
5.2 Section cut from the countertop
Create an opening with the dimensions
shown in the figure in the countertop of the
piece of furniture.
Heat production during appliance
operation
Risk of fire
• Check that the carcase material is heat
resistant.
• Check that the carcase has the required
openings.
The minimum clearance between a
ventilation hood and the cooking
surface must be at least the
distance indicated in the ventilation
hood installation instructions.
If a hood is installed above the
hob, refer to the hood instructions
manual to ensure that the correct
clearance is left.
The following operation requires
building and/or carpentry work
and must therefore be carried out
by a competent tradesman.
Installation can be carried out on
various materials such as masonry,
metal, solid wood or plastic
laminated wood as long as they
are heat resistant (
>90°C
).
L (cm)
X (mm)
Y (mm)
60
555 - 560
478 - 482
72
555 - 560
478 - 482
100
839 - 844
480 - 484
L = 60 cm
A (mm)
B (mm) C (mm)* D (mm)
E (mm)
min 220 min 460 min 750
20 - 40
min 50
L = 72 cm - L = 100 cm
A (mm)
B (mm) C (mm)* D (mm)
E (mm)
min 280 min 460 min 750 20 - 40
min 50
Summary of Contents for Piano P705ES
Page 32: ......