background image

Use

65

EN

Correct positioning of the flame-
spreader crowns and burner caps

Before lighting the hob burners, make sure 
that the flame-spreader crowns are 
correctly positioned in their housings with 
their respective burner caps. Make sure that 
the holes 

1

 of the flame-spreader crowns 

are aligned with the thermocouples 

2

 and 

igniters 

3

.

Practical tips for using the hob

For better burner efficiency and to minimise 
gas consumption, use pans with lids and of 
suitable size for the burner, so that flames 
do not reach up the sides of the pan.
Once the contents come to the boil, turn 
down the flame far enough to ensure that 
the liquid does not boil over.

3.4 Using the storage compartment

The storage compartment is at the bottom of 
the cooker. To open it, pull the handle 
towards you. It can be used to store 
cookware or metallic objects necessary 
when using the appliance.

3.5 Using the oven

Switching on the oven

To switch on the oven:

1. Select manual cooking 

 or set the 

cooking duration using the timer knob. 
Adjustment is progressive so that the time 
can also be set to any intermediate value 
between these numbers.

2. Select the temperature using the 

temperature knob.

3. Select the cooking function using the 

function knob.

4. At the end of timed cooking, a buzzer 

sounds that stops automatically after a 
few seconds.

Pan diameters:

•  

AUX

: 12 - 14 cm.

•  

SR

: 16 - 24 cm.

•  

R

: 18 - 26 cm.

•  

UR2

: 18 - 28 cm.

Summary of Contents for Mista Aesthetic B901GMXI9















































Reviews: