User instructions
19
Switching on
With the door open, press the
ON/OFF
button
on the top panel
to switch on the
dishwasher. The LED on the button and the
DISPLAY
light up.
IMPORTANT
The door of the dishwasher must
ble closed within 4 seconds after use of the
program selection button
for all functions (e.g. program selection, change, delection,
etc.). If the door is not closed within 4 seconds,
one or more program lights
(depending on the current opertaion)
will flash at high speed
to indicate that
the
operation must be confirmed
before the door is closed.
To
confirm, simply press the program selection button once
and the flashes will
slow down; close the door an once to start/restart the dishwasher.
The same applies if the dishwasher is opened
with the program delay option set
and the cycle not started
(e.g. to add more dishes):
the program selection button
must be pressed before the door is closed
, restarting the program delay countdown.
If the door of the diishwashehas not been closed or has been incorrectly closed, the
washing cycle will not begin.
1. The cycle times and electrical energy listed use and care manual are based on
normal soil loads and 120°F (49°C) incoming water and will vary based on your
actual conditions.
2. Program for energy star; the DRY ASSIST option must be
enabled
.
3.
Only “POTS & PANS”
program
conforms to NSF std 184
and is certified by
INTERTEK
with the
ETL SANITATION LISTED
.
When the
“Sani ok”
appears on display it means that the dishwasher and its
contents have been sanitized according to the requirements of the
National
Sanitation Foundation (NSF).
4.
DRY
option selected (default)/not selected
Automatic door opening – Dry
Automatic door opening is
included
in programs indicated with ** in the first column
If the dishwasher door is open or not properly closed, the washing cycle
will not start.
