User instructions
3.3 Washing programs
The dishwasher is equipped with a control panel and an
INFORMATION
DISPLAY (8)
, described in chapter "1. Description of the controls", from
which it is possible to carry out all the power switch-on, switch-off and
programming operations.
Before starting a washing program make sure that:
•
The water supply tap is open.
•
The correct amount of detergent has been added to the
dispenser.
•
The baskets have been correctly loaded.
•
The spray arms are able to rotate freely and without
obstruction.
•
The dishwasher door is securely closed.
CANCELLING THE CURRENT PROGRAM
To annul the current program, press the
START/PAUSE
button
(3)
for a
few seconds, until the beep of confirmation is heard.
At this point, to end the program, press the
HALF LOAD (5)
and
START/PAUSE (3)
buttons simultaneously.
"
P0
" appears on the
INFORMATION DISPLAY (8)
and the dishwasher
will automatically switch to the end of the cycle, displaying the word
"
End
" when done.
CHANGING THE PROGRAM
To change the program, press and hold down the
START/PAUSE
button
(3)
for a few seconds, then select the new program as described
previously in the instructions; press the
START/PAUSE
button
(3)
again,
holding it down for a few seconds.
12
