User instructions
26
ADJUSTING THE WATER SOFTENING SYSTEM (available in all
programs except the soak program)
The dishwasher is equipped with an electronic device for adjusting the
water softening setting according to the hardness of the water. To adjust
the water softening setting, proceed as follows:
•
Keep
the
PROGRAM DELAY
button
(4)
pressed for a few seconds,
until
H3
appears on the
INFORMATION DISPLAY (8)
.
•
The
PROGRAM DELAY
button
(4)
can be pressed again to select
the most suitable hardness value (
H1
,
H2
…
H5
).
Refer to the "Water
Hardness Table" to select the value.
•
Press any key to exit the programming mode, or wait a few seconds.
WATER HARDNESS TABLE
WATER HARDNESS
German Degrees (°dH)
French Degrees (°dF)
SETTING
0 - 4
0 - 7
.h 0
5 - 15
8 - 25
.h 1
16 - 23
26 - 40
.h 2
24 - 31
41 - 60
.h 3
32 - 47
61 - 80
.h 4
48 - 58
81 - 100
.h 5
Contact your local water board for information on the hardness of your
water supply.
