If symbol
flashes on the control panel:
- Water faucet may be closed. Check.
- Mains water may be cut-off. Check. If so, switch the programme knob
to position 0. You can select a programme and run your machine after
the mains water is supplied.
- Mains water pressure may be low. Check.
- Water inlet hose may be twisted. Check.
- Water inlet hose may be clogged. Clean water inlet hose filters. (*)
- Valve inlet filter may be clogged. Clean the valve inlet filters. (*)
(*) See the chapter regarding maintenance and cleaning of your
machine.
31
CHAPTER -7: WARNING SYMBOLS
WARNING OF WATER CUT-OFF / LOW MAINS WATER
PRESSURE
