8 - EN
Auxiliary functions
Auxiliary function selection keys
Select the required auxiliary functions before
starting the program.
C
Auxiliary function buttons may differ
according to the model of your
machine.
Auxiliary function selection
If an auxiliary function that should not be
selected together with a previously selected
function is chosen, the first selected
function will be cancelled and the last
auxiliary function selection will remain active.
For example: If you want to select pre-wash
first and then quick wash, pre-wash will be
cancelled and quick wash will remain active.
Auxiliary function that is not compatible
with the program cannot be selected. (see
“Program Selection Table”)
Pre-wash
A pre-wash is only worthwhile for heavily
soiled laundry. Without pre-wash you save
energy, water, detergent and time. Pre-
wash without detergent is recommended for
lace and curtains.
Rinse Plus
With this function, you can increase the
number of current rinsing steps. Thus,
sensitive skins’ risk of being affected by the
remainder detergent on the clothes will be
decreased.
Rinse hold
If you do not want to unload your clothes
immediately after the cotton, synthetics,
woolen and delicate fabrics program, you
may release your clothes inside the machine
in the last rinsing water by pressing the rinse
hold button in order to prevent your clothes
become wrinkled. After this process you
may spin your laundry by pressing “Start/
Pause/Cancel” button or you may end the
program by pressing “Start/Pause/Cancel”
button for 3 sec.
• In the machines equipped with spin
speed selection knob or button, you
can spin by selecting the desired
spin speed and press “Start/Pause/
Cancel” button.
• As for machines not equipped with a
spin speed selection knob, you can
end the program without a spin cycle
by pressing the “Start/Pause/Cancel”
button and draining the water. If you
wish your clothes be spun, you can
spin them by selecting “pump+spin”
program.
Spin speed reduction
You may use the speed reduction button
whenever you wish to spin your clothes
below the maximum spin speed. When
speed reduction button is pressed, spin
speed will be at the minimum rpm given on
the panel.
No spin
You may use this program if you do not
want to spin your clothes at the end of
cottons, synthetics, woolen or delicate
programs.
No Heat
If you wish to wash your clothes in cold
water, you can use this program.
Starting the Program
Press “Start/Pause/Cancel” button to start
the program. “Start/Pause/Cancel” button
will light up to indicate that the program has
started. The door is locked and the “Lid”
light fades.
Progressing a program
Progress of a running program is shown
through the program follow-up indicator. At
the beginning of every program step, the
relevant indicator lamp will light up and light
of the completed step will turn off.
C
If the machine is not spinning, the
program may be in rinse hold mode
or the automatic spin correction
system has been activated because
of excessive unbalanced distribution
of laundry in the machine.
Changing the selections after the
program has started
You can use this feature after your machine
has started to wash different textile groups
in the same batch of clothes under higher
or lower temperatures. You must cancel
the ongoing program in order to change the
washing program.
For example, press and hold the “Start/
Pause/Cancel” button for 3 seconds to
“Cancel” the program in order to select
“Cottons 40” program instead of “Cottons
60” program. Select the “Cottons 40”
program by rotating the program knob.
Press “Start/Pause/Cancel” button to start
the program.
Switching the machine to standby
mode
Press “Start/Pause/Cancel” button
momentarily to switch your machine to the
standby mode. Auxiliary functions can be
Anti Piega
