EN
1
14
Connections
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the
chimney using either a flexible or rigid pipe ø120 mm, the choice
of which is left to the installer.
• Fix the pipe in position using sufficient pipe clamps (not sup-
plied).
• Remove any activated charcoal filters.
ø 120
9
AIR OUTLET IN RECYCLING VERSION
• Make sure that the hood body has been completely fixed.
• Make sure that hood is equipped with charcoal filters.
ELECTRICAL CONNECTION
• Connect the hood to the mains through a two-pole switch hav-
ing a contact gap of at least 3 mm.
• Remove the grease filters (see paragraph Maintenance) being
sure that the connector of the feeding cable is correctly inserted
in the socket placed on the side of the fan.
Summary of Contents for KSEI62E
Page 83: ......
Page 84: ...991 0356 703_01 141031 ...