Use
31
ENEN
4. Fill the kettle with the required quantity of
water, referring to the marks on the level
indicator (
2
).
5. Close the lid again and place the kettle
back on its base.
6. Insert the plug into the power socket. All
LEDs come on and a beep sounds to
indicate that the appliance has been
turned on. The LEDs of START/STOP and
Keep Warm keys switch off after 2
seconds and the default temperature set
is 100°C.
7. Use the temperature selector (
3
) to select
the required temperature. Move the
temperature selector to the left to
decrease the temperature. Move the
temperature selector to the right to raise
the temperature.
8. Press the START/STOP key (
4
): the LED
will come on and a beep will sound to
indicate that the cycle has started. The
LED of the selected temperature will turn
on, while those for the temperatures
below that set will flash and then turn on
progressively as the water reaches the
corresponding temperature.
9. When the water reaches the set
temperature, the corresponding LED and
those of the temperatures below it will all
be lit.
The LED of the START/STOP key turns off
and the appliance beeps to indicate the
end of the cycle.
2
3
4
