EN
9
9
ELECTRICAL CONNECTION
• Connect the Hood to the Mains power sup-
ply, inserting a two-pole Switch with a con-
tact aperture of at least 3 mm.
• Remove the Metal grease filters (see par.
on “Maintenance”) and make sure that the
power supply Cable is properly inserted in
the Suction fan socket.
• Take the wires indicated in fig.
1
and pass
them through the slot formed on the galva-
nized diffuser support, as shown in fig.
2
.
• Position the finishing plug
27
over the
housing in the diffuser support, fixing it us-
ing a screw
12e
(2.9 x 9.5) and applying the
2 cable clamp elements
26
as indicated in
figs.
3
and
4
.
• Connect the Controls Connector fig.
5
.
• Connect the Lighting Connector fig.
6
.
• Store both the Connectors in the Protective
box
24
and close it with 2 Screws
12e
(2.9
x 9.5), provided.
• Remove the protective film from the dou-
ble-sided adhesive on the connection box,
and fix it inside the motor compartment fig.
7
.
1
2
3
4
5
6
7