EN
4
FILTER version:
Leave the motor inlet free. Install the active carbon
filters as shown on page 8.
If the hood is not supplied with an active carbon filter
you must buy it separately at your nearest authorised
Smeg dealer.
For some models there is a standard set of fittings
(fig.5) to be fixed to the wall by expansion plugs at
a suitable height in order to channel the airflow in
correspondence with the flue slits. Insert laterally the
extensions R2 on the fitting R1. Connect the fitting R1
at the outlet of the hood body by means of a tube of
diameter D.150mm.
• FLUE ASSEMBLY (fig. 6):
Position the flue bracket (K) to the required top limit.
Mark the two holes on the wall to fix the bracket. Drill
and fix the bracket with the supplied expansion plugs.
Carefully position the flue unit on the hood. Fix the
lower flue to the hood by means of the screws Z.
Carefully extend the top flue to the upper limit.
Secure the top flue to the flue bracket K using the
screws L.
• ELECTRIC CONNECTION
We recommend that electric connections are carried
out by a professional installer.
In the case of a direct electric connection to the mains,
between the appliance and the mains, place a bipolar
switch with a minimum opening of 3mm between
contacts, sized to the load and compliant with the
current regulations.
Summary of Contents for K90XE
Page 1: ...Instruction booklet ...