background image

 

 

User instructions 

 

 

 

22

 

 

 

LOADING THE LOWER BASKET 

 

Carefully load flat plates, soup plates, dessert and serving dishes, 
positioning them vertically. Pots, pans and their covers must be loaded 
upside down. When loading soup plates and dessert bowls, be sure to 
leave a gap between them. 

 

Loading examples: 

 

    

 

 

CUTLERY BASKET 

 

The basket has removable top grids into which items of cutlery can be 
inserted to keep them properly spaced and allow water to pass between 
them effectively.  
The cutlery supports and central lid are in the bag of accessories. The 
central lid is intended to act only as a cover: do not place the cutlery in it.

 

Depending on model

 the grids may vary in shape. 

 

 

The cutlery should be arranged in an orderly manner inside the basket, 
with the handles pointing downwards. Take care during loading to avoid 
injury from the knife blades. The basket is suitable for all types of cutlery, 
except those long enough to interfere with the upper spray arm. Ladles, 
wooden spoons and cooking knives can be placed in the upper basket, 

making sure that the knife blades do not protrude from the basket. 

 

 

   

 

Summary of Contents for GV61224

































Reviews: