Unplug your machine.
Close the water tap.
On the tap part of your machine’s water inlet hose and at the ends of
water inlet valves, there are filters to prevent dirt and foreign materials
in the water entering the machine. If the machine is unable to receive
sufficient water although your water tap is opened, these filters should
be cleaned.
Remove the water inlet hose.
Remove the filter found on the water inlet valve using pliers
and wash thoroughly with a brush.
Clean the filters of the water inlet hoses located on the tap side
by removing manually together with the washer.
After you clean the filters, you can fit them the same way as
you have removed them.
CAUTION:
Filters of water inlet valves may be clogged due to
contaminated water tap or lack of necessary maintenance or
valves may be broken down, causing water to leak from your machine
continuously.
For these reasons, breakdowns that may arise are
out of scope of warranty.
37
CHAPTER -8: MAINTENANCE AND CLEANING OF YOUR
MACHINE
WATER INLET FILTERS
