Smeg FTU171X7 User Manual Manual Download Page 3

1

Never use a damaged power cord or plug,

or loose main socket.

There is a risk of fire, electric shock or

    serious injury.

Be sure to ground. Check if your wall outlet

is grounded (earthed).

There is a risk of electric shock hazards.

Never unplug by pulling only the power cord

wire. Always grip the plug firmly.

Let the cord from the plug outlet be

directed downwards.

If it is directed up, the cord near the plug is

    bent and can be damaged, which can

    cause an electric shock or fire.

Do not install the refrigerator on a wet

floor or in a place with excessive humidity and

moisture.

Electric insulation gets weakened,

    resulting in a risk of electric shock

    hazards.

Never let the power cord touch or pass over

heating appliances.

Power cord can be damaged, resulting in a

    risk of electric shock hazards.

Check if plug is loose from the wall outlet.

Electric insulation gets weakened,

    resulting in a risk of electric shock

    hazards.

Never pour or spray water into the

refrigerator (both interior and exterior).

Electric insulation gets weakened, resulting

    in a risk of electric shock hazards.

Do not place containers with water or

liquid on top of refrigerator.

Water can spill into the refrigerator

    and can cause electric shock hazards or

    damage.

Do not let children hang on the refrigerator

doors.

Refrigerator can fall and harm them.

Be sure to keep for safety!

Read these safety instructions thoroughly and carefully 

before using. Please keep this user guide on hand for future 

reference.

Indicates the possibility of danger of

death or serious injury.

Indicates the possibility of risk of personal

injury or material damage.

Other Signs

DO NOT remove or disassemble!

Be sure to unplug from outlet/mains!

NO. DO NOT...

Be sure to keep and follow!

Caution

1. If the supply cord becomes damaged, it must be replaced  

    by the manufacturer or its service agent or a similarly    

  qualified person in order to avoid a hazard.

2. This appliance is not intended for use by persons  

 

  (including children) with reduced physical, sensory or    

  mental capabilities, or lack of experience and knowledge,  

    unless they have been given supervision or instruction   

  concerning use of the appliance by a person responsible  

  for their safety.

WARNING

Never let the power cord be crushed

by the refrigerator itself or other (heavy)

objects.

Never bend power cord excessively.

If the cord is damaged or peeled, it can be a

    cause of fire and electric shock.

Do not plug several appliances into the

same wall outlet.

It can be a cause of overheating and/or fire.

    Use an exclusive grounding receptacle for

    the refrigerator.

Never hold the power cord or plug with wet

hands.

There is a risk of electric shock.

ADF702-11b(영).indd   1

2016-06-27   오후 2:22:45

Summary of Contents for FTU171X7





















Reviews: