background image

Instructions for Use

57

• 

Ice and frost layer increase energy consumption, so do clean the

appliance as soon as the layer is 3-5 mm thick.

• 

If the gasket is damaged or if it turns out that the sealing is poor, the

energy consumption is substantially higher. To restore efficiency,

replace the gasket.

• 

The condenser on the rear wall should be always clean, free of dust

or any impurities.

• 

Always consider instructions stated in sections Positioning and

Energy Saving Tips, otherwise the energy consumption is

substantially higher.

Important

• 

If you have bought this appliance to replace an old one equipped with

a lock that cannot be opened from inside (lock, bolt), make sure that

the lock is broken. This will make it impossible for children to lock

themselves inside the appliance and suffocate.

• 

The appliance must be correctly connected to the mains supply. (see:

Connecting to the Mains Supply).

• 

Do not touch the cooled surfaces while the appliance operates,

especially not with wet hands, because the skin may stick to the cold

surfaces.

• 

Do not freeze bottles containing liquid, especially not soft drinks, such

as mineral water, sparkling wine, beer, cola  etc., because liquid

expands during freezing and the glass bottle is very likely to blow up.

• 

Do not eat frozen food (bread, fruit, vegetables), because you can get

frostbites.

• 

If the food has strange smell or color, throw it away, because it is

very likely that it is spoiled and therefore dangerous to eat.

• 

Disconnect the appliance from the power supply before repairing it

(only a qualified technician should repair it), before cleaning and

before replacing the light bulb.

• 

Do not defrost the appliance with other electric appliances (as for

example with hair dryer) and never scrape the frost layer with sharp

objects. Use only enclosed tools or tools recommended by the

manufacturer.

• 

For the sake of environment protection - be careful not to damage

the rear wall  of the appliance (the condenser unit or the tubes - for

example when moving the appliance) or any part of the refrigerating

system inside the appliance. Do not use sharp object for defrosting

the appliance. Use only enclosed tools or tools recommended by the

manufacturer.

• 

The refrigerating system of the appliance is filled with refrigerant and

oil, so when the appliance is damaged, handle it with care and

Summary of Contents for FI227B























Reviews: