background image

142468

Sound alarm starts in case of excessively high temperature of 
the freezer (

intermittent beep

), red light (

D

) is fl ashing.

•   Alarm is switched of by pressing the knob 

C

. Red light goes off 

automatically when the freezer is cooled suffi ciently and there 
is no danger for stored food to get foul.

•   If the temperature in the freezer is not at the level required for 

the preservation of stored food, the alarm will be switched on 
every 24 hours to alert you of this condition.

•   At the fi rst start of the appliance the alarm has a 24-hour 

temperature alarm delay, because the freezer has not reached 
the required temperature level. This prevents the unnecessary 
alarm operation.

Indicates current temperature in the refrigerator (positive single 
digit numeral), or in the freezer (negative double digit numeral). 
During the setting procedure the display fl ashes and indicates 
momentary temperature setting. It also fl ashes if the freezer 
temperature is so high that there is danger for stored food to 
become foul.

High temperature freezer 
alarm

High temperature freezer 
alarm

Digital display

Digital display

14

Summary of Contents for FC325XNF1





























Reviews: