background image

16  -  INSTALLATION

914779594/C

The doors are misaligned:
• Check that the appliance is level.

• Level the appliance using its feet.

INSTALLATION

Electrical connection

General information

• Check the mains characteristics against the 

data indicated on the plate. The 
identification plate bearing the technical 
data, serial number and brand name is 
visibly positioned inside the appliance. Do 
not remove this plate for any reason.

• Make sure that the plug and socket are of 

the same type.

• Avoid using adapters, gang sockets or 

shunts as these could cause overheating 
and a risk of burns.

• The plug must always be accessible when 

the appliance is installed.

• Leave the appliance standing vertically for 

at least two hours before turning it on for the 
first time.

• If it is necessary to replace the power cable, 

this must be performed by an authorised 
technician from Technical Support Service.

Positioning

Choice of location

Always install the appliance in a dry place with 
satisfactory ventilation. Depending on its climate 
class (stated on the nameplate inside the 
refrigerator compartment), the appliance can 
be used in different temperature conditions.
• Install the appliance at least 3 cm away 

from electrical or gas cookers and at least 
30 cm away from combustion heaters or 
radiators.

• The appliance must not be installed near 

heat sources. If this is not possible, suitable 
insulation must be used.

• If installed underneath wall units, at least 5 

cm clearance must be left.

• Ensure that the appliance is located with 

sufficient space for the door to open and for 

the internal drawers and shelves to be 
removed, if necessary.

Spacers

To ensure proper cooling of the condenser, the 
appliance must not be placed too close to the 
wall. To prevent this, the appliance comes 
complete with two plastic spacers, which must 
be fitted in the rear part of the appliance.

Positioning

Position the appliance on a firm, level surface.

See General safety instructions.

See General safety instructions.

Class

Room temperature

SN (Subnormal)

+ 10°C to + 32°C

N (Normal)

+ 16°C to + 32°C

ST (Subtropical)

+ 18°C to + 38°C

T (Tropical)

+ 18°C to + 43°C

Summary of Contents for FAB32LCR5UK

















Reviews: