User instructions
13
3.2
Washing programs
Before starting a washing program make sure that:
The water supply tap is open.
The correct amount of detergent has been added to the
dispenser.
The baskets have been correctly loaded.
The spray arms are able to rotate freely and without
obstruction.
The dishwasher door is securely closed.
Warning
:
during the initial phase of the washing program, the operation of sprayers
is not perceived because they start rotating about 5 minutes after the start.
This is the normal operation of the washing cycle.
QUICK TIME PROGRAMS
Select this option together with any washing program (except the soak program) to
SHORTEN
the cycle by from a minimum of 10% to a maximum of 55%, depending
on the cycle selected. To activate this option, press the
QUICK OPTION
button
(light comes on) after selecting the program required. The option is automatically
deactivated at the end of the program.
PROGRAM DELAY
The start of the program can be delayed by
3, 6
or
9
hours.
This allows you to set the dishwasher to work at the times of day most
convenient to you.
After setting the program
, press the button to select
the delay you require; the corresponding light will come on. When the door
is closed, the appliance will prewash the dishes, after which the "program
delay" set will come into effect. If you wish to exit the procedure without
setting delayed start, press the button in sequence until all three lights are
out.
N.B.:
It is not possible to select the
PROGRAM DELAY
option once the
cycle has begun.
