User instructions
43
IMPORTANT:
at the end of the program remember
to deactivate the
function
to ensure the next wash is not also carried out in half load
mode
by mistake
.
A
cutlery basket
will be inserted in the basket used for the "half load"
basket, while the other basket will be left empty.
WARNING: do not load dishes and cutlery into the non-selected
basket, because the water spary will only reach the selected basket.
TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT
•
Always try to run the dishwasher
fully loaded
.
•
Do not wash the dishes in running water.
•
Use the washing program that is
most appropriate
for each type of
load.
•
Do not carry out any preliminary rinsing.
•
If available, connect the dishwasher to a hot water supply up to
60°C.
•
When possible,
disable the drying cycle
and leave the door open
at the end of the washing cycle: the residual air and heat will dry the
dishes perfectly.
TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT
THE ENVIRONMENT
The phosphates contained in dishwasher detergents are harmful to the
environment. To avoid using excessive amounts of detergent and to
save on electricity, observe the following:
•
separate
the more delicate items from dishes that are more
resistant to aggressive detergents and high temperatures;
•
do not pour
the detergent directly on the dishes.
REMOVING THE DISHES
At the end of the washing program, wait at least
20 minutes
before
removing the dishes, to allow them to cool down. To prevent any water
droplets on the upper basket from falling on the dishes in the lower
basket, it is
advisable
to unload the lower basket first, and then the
upper basket.
