User instructions
37
STARTING THE DISHWASHER
After correctly carrying out all the preceding operations, to start the dishwasher simply press the
START/STOP (5)
button for a few seconds, until the start cycle acoustic device sounds. The
INFORMATION DISPLAY (8)
will show the duration of the program in minutes. The duration time
is only approximate, because it depends on the washing conditions (quantity of dishes, water
temperature, etc.), and is also continually updated as the washing program progresses.
The
INFORMATION DISPLAY (8)
shows the estimated duration of the washing program; if it
exceeds
60 minutes
, the hours and minutes are displayed in alternation.
If it is necessary to open dishwasher door during the washing cycle, there will be a
1-minute delay
before the program can be resumed. After correctly closing the door, press the
START/STOP (5)
button
again
.
This operation may negatively affective the progress of the washing cycle.
END OF CYCLE
The end of the washing cycle is signalled by a brief sounding of an acoustic device and by the
blinking of the selected program on the
INFORMATION DISPLAY (8)
.
Before setting a new washing program, the door must first be opened, then reclosed, or the
START/STOP (5)
button pressed to “reset” the display and stop the flashing.
REMOVING THE DISHES
At the end of the washing program, wait at least
20 minutes
before removing the dishes, to allow
them to cool down. To prevent any water droplets on the upper basket from falling on the dishes in
the lower basket, it is
advisable
to unload the lower basket first, and then the upper basket.
