User instructions
15
INTERRUPTING A PROGRAM
To interrupt a program, press the
START/PAUSE
key
(F)
and keep it
pressed until "
In pause
" appears on the
bottom
line of the
DISPLAY (G)
.
To restart the program, repeat this operation until "
Duration XX min
"
reappears on the
bottom line of the display
.
Opening the door only cuts out the program in progress, but this is not
recommended, since water splashes or gusts of steam might escape.
When the door is closed the program restarts automatically, even it
was interrupted by pressing the START/PAUSE key (F).
CHANGING THE PROGRAM (standard programming)
To change a program while it is running, proceed as follows:
•
press
key
(F)
to set the program in pause status;
•
open the door
and select the new program using key
(B)
;
•
close the door
; the changes relating to the new program will
appear on the
DISPLAY (G)
.
CHANGING THE PROGRAM (assisted programming)
•
To change a program while it is running, the appliance must be
reprogrammed, or
•
Switch the appliance off and back on to access the normal
programming mode.
Summary of Contents for DI612SD
Page 43: ......
