User instructions
15
3.3
Washing programs
The dishwasher is equipped with a control panel and an
INFORMATION
DISPLAY
from which it is possible to carry out all the power switch-on,
switch-off and programming operations.
Before starting a washing program make sure that:
The water supply tap is
open.
The
correct amount of detergent
has been added to the
dispenser
.
The baskets have been
correctly loaded.
The spray arms are able to
rotate freely
and without
obstruction.
The dishwasher door is
securely closed
.
Warning
:
during the initial phase of the washing program, the operation of sprayers
is not perceived because they start rotating about 5 minutes after the start.
This is the normal operation of the washing cycle.
LIGHTING
Pressing the
ON/OFF
button
will start the dishwasher and will lit up the
dishwasher pilot light. After approximately
3 second
from this operation
the
DISPLAY
will be turned on with a visualization that will depend upon
the state of the dishwasher.
PROGRAMMING
All the programming operations are possible only with closed door. With
open door, on the
DISPLAY
will appear
- - : - -.
