CWC 611
14
1. Turn on the mains water tap (user)
2. The level of detergent and rinse aid in the containers.
3. That there is regenerating salt in the relative container (if fitted).
Using the buttons
Button
Short press
Pressed for 2”
Pressed for 5”
Display of temperatures in
Boiler (L3) and tank (L1)
On/OF
Start Pump-out
Start Regeneration
Start Short Programme
Start Medium
Programme
Start Long Programme
Set P0
Start programme P0: emptying of tank to clean filters.
Switch off and back on to allow reuse.
8.2 Before washing
Use only detergents and rinse aids for industrial dishwashers. Do not use detergents intended for hand washing.
We recommend the use of Smeg products, specially developed for this dishwasher.
When topping up the tanks, take care not to swap the products; this might damage the dishwasher and cause
malfunctions.
Do not mix different detergents; this would damage the dispenser device.
Failure to comply
with this recommendation
leads to
forfeiture of the warranty
entitlement on the appliance’s water system.
Industrial dishwasher detergents may cause serious irritation. Comply carefully with the instructions provided by the
detergent producer on the pack.
Check
