8 - PRECAUTIONS
91477A491/A
display may differ from those in the manual.
Manufacturer’s liability
The manufacturer declines all liability for
damage to persons or property caused by:
• use of the appliance other than that
specified;
• failure to comply with the instructions in the
user manual;
• tampering with any part of the appliance;
• use of non-original spare parts.
Technical Support.
• In the event of failure of the appliance,
contact the technical support and have the
repair carried out by qualified personnel
only.
• make sure you have the model and serial
number available on the identification plate.
• Use original spare parts only.
• Do not try to repair the appliance yourself or
without the assistance of a qualified
technician: this affects safety and may void
the warranty.
• Genuine spare parts for some specific
components remain available for a minimum
of 7 or 10 years, depending on the type of
component, from the date the model is
released on the market.
Identification plate
The identification plate bears the technical data,
serial number and brand name of the
appliance. Do not remove the identification
plate for any reason.
Energy label
To be informed about the performance of your
device via the EU EPREL database
visit the following web address and enter the
model name (available on the identification
plate):
https://eprel.ec.europa.eu
On the energy label there is a QR code for a
quick access to the web address. Use a device
equipped with an appropriate reading
program.
The energy label must be kept together with all
documents supplied with the appliance.
Disposal
This appliance conforms to the WEEE
European directive (2012/19/EU) and
must be disposed of separately from
other waste at the end of its service life.
The appliance does not contain substances in
quantities sufficient to be considered hazardous
to health and the environment, in accordance
with current European directives.
To dispose of the appliance:
• Cut the power cable and remove it.
• Deliver the appliance to the appropriate
recycling centre for electrical and electronic
equipment waste, or return it to the retailer
when purchasing an equivalent product, on
a one for one basis.
Our appliances are packaged in non-polluting
and recyclable materials.
• Deliver the packing materials to the
appropriate recycling centre.
Information for control bodies
• For EcoDesign checks, the installation and
preparation of the appliance must comply
with EN 62552 standard.
• Ventilation requirements, dimensions and
minimum space from the rear wall are
indicated in the "Installation" chapter of this
manual.
• Contact the manufacturer for more
information.
To save energy
• Reduce any opening of the door to a
minimum to avoid temperature dispersal.
• Whenever the appliance is to remain
unused for long periods, it should be
switched off.
Light sources
• This appliance contains light sources which
cannot be replaced by the user and must
only be replaced by the technical assistance
Power voltage
Danger of electrocution
• Disconnect the mains power supply.
• Unplug the appliance.
Plastic packaging
Danger of suffocation
• Do not leave the packaging or any part of it
unattended.
• Do not let children play with the plastic
bags.
