32
Instructions for the user
7.3
Turning off the freezer
The freezer should be turned off if it is not going to be used for a period of time. Hold down the button
(7)
for a few seconds. Then empty the drawers, unplug the freezer from the mains and, once it has
defrosted, dry off any residual moisture that may have accumulated. Leave the door ajar to ensure that
moisture and stagnant air do not cause unpleasant odours.
7.4
Practical advice on energy saving
- Install the freezer in a cool, well-ventilated area, away from direct sunlight and heat sources;
- Do not put hot food in the freezer. Wait until food and drinks have cooled to room temperature before
putting them in the freezer drawers;
- Keep the amount of time and the number of times the door is opened to a minimum to ensure that the
inside of the freezer does not warm up more than necessary;
- Clean the condenser (at the back of the freezer) periodically to prevent any loss of efficiency of the
appliance;
- Only use the rapid freeze function for as long as it is actually needed;
- If the freezer will remain unused for a long period, it is advisable to empty the appliance and turn it off.
7.5
Noises during operation
The freezer cools by means of a compression system. To maintain the selected temperature inside the
freezer, the compressor starts up and, depending on the cooling level requested, may function
continuously if required. When the compressor starts to function, it creates a buzzing noise which
generally diminishes in intensity after a few minutes. Another sound linked to the normal operation of the
freezer is a gurgling noise resulting from the movement of coolant within the coolant loop tubes. This
noise is normal and does not indicate an appliance malfunction. If it becomes too loud, this may mean
that there are other causes. Checks must then be made to ensure that:
- the freezer is level on the floor and the compressor does not vibrate during operation:
if this is not
the case, adjust the feet it is equipped with
;
- the drawers are placed correctly in the proper slots:
if they are not, put them in correctly
;
-
Bottles and containers on the various shelves are stable and not touching each other:
otherwise, the vibration resulting from compressor operation could generate noise;
- Do not place the
freezer in such a way that it is in contact with furniture or other home
appliances
.
7.6
Identifying and eliminating any operational faults
Your new freezer has been designed and manufactured based on rigorous quality standards. The aim of
this section is to enable you to identify the origin of any operational fault that may arise, before
contacting Smeg's technical support service.
