UK - 19 -
Advice for Saving Energy
• Do not install the appliance close to heat producing appliances. Such as cooker,
oven, dishwaher or radiator, and locate the appliance in the coolest part of the room.
• Locate the appliance ina cool well ventilated room and make sure that the air openings
of the appliances are not obstructed.
• Always leave warm food to cool down to room temperature before placing in the
freezer.
• Try to avoid keeping the door open for long periods or opening the door too frequently
as warm air will enter the cabinet and cause the compresor to switch on
unnecessarily often.
• Ensure there are no obstructions preventing the door from closing properly.
• Cover foods before placing them in the freezer. This cuts down on moisture build-up
inside the unit.
• Refer to the “temperature settings” section for the suggested temperature control
settings.
• Do not block cold air vents. Doing so causes the freezer to run longer and use more
energy.
• Keep freezer full.
• Level the freezer so that the door closes tightly.
• Occasionally clean the rear of the appliance with a vacuum cleaner or paint brush to
prevent an increased power consumption.
• Keep door gaskets clean and pliable. Replace gaskets if worn.
IMPORTANT NOTES:
• Compressor protection function will be activated after sudden power breakdowns or
after unplugging the appliance, because the gas in the cooling system is not
stabilized yet. Your freezer will start after 5 minutes, there is nothing to worry about.
• If you will not use your freezer for a long time (e.g. in summer holidays) unplug it.
Clean your freezer according to Chapter 4 and leave the door open to prevent humidity
and smell.
• If the problem persists after you have followed all the instructions above, please
consult to the nearest Authorized service.
• The lifetime of your appliance stated and declared by the Department of the Industry
is 10 years (the period for retaining parts required for the proper functioning of the
appliance).
