EN - 15 -
INSTRUCTIONS PREALABLES
PART - 1.
Safety Instructions
•
If the model contains R600a-see name plate under refrigerant (the coolant isobutane),
naturals gas that, is very environmentally friendly but also combustible. When transporting
and installing the unit care must be taken to ensure that none of the refrigeration circuit
components become damaged. In the event of damage avoid naked flames or ignition
sources and ventilate the room in which the unit is placed for a few minutes.
Warning:
Keep ventilation openings in appliance enclosure or in structure for building
in, clear of obstruction.
• Do not use mechanical devices or other artificial means to accelerate the defrosting
process.
•
Do not use electrical appliances in the refrigerator or freezer compartment of the
appliance.
•
If this appliance is to replace an old refrigerator with a lock; break or remove the lock as a
safety measure before storing it, to protect children while playing might lock themselves
inside.
•
Old refrigerators and freezers contain insulation gases and refrigerant, which must be
disposed of properly. Entrust the disposal of a scrap unit categorically to competence of
your local waste disposal service and contact your local authority or your dealer if you
have any questions. Please ensure that the pipe of work of your refrigerating unit does
not get damaged prior to being picked-up by the relevant waste disposal service.
Important note:
•
Please read this booklet before installing and switching on this appliance. The
manufacturer assumes no responsibility for incorrect installation and usage as described
in this booklet.
Conformity Information
• Tropical Class is defined for the environment temperatures between 16°C and 43°C in
accordance with the TS EN ISO 15502 Standards.
•
The appliance is designed in compliance with the EN15502, IEC60335-1 / IEC60335-2-
24, 2004/108/EC standards.
Please ask your municipal authority about the disposal of the WEEE for
the reuse, recycle and recovery purposes.
