Smeg Commercial Oven ALFA41UK Manual Download Page 3

Introduction 

 

 

 

NEVER PUT INFLAMMABLE OBJECTS IN THE OVEN: THEY COULD 
BE ACCIDENTALLY LIGHTED AND CAUSE FIRES. 
 
 

 

 

THE APPLIANCE BECOMES VERY HOT DURING USE.  SUITABLE 
HEAT-PROOF GLOVES SHOULD BE WORN FOR ALL OPERATIONS. 

 

 

THE I.D. PLATE WITH TECHNICAL DATA, REGISTRATION NUMBER 
AND BRAND NAME IS LOCATED IN AN EXPOSED POSITION AT THE 
REAR OF THE OVEN.  
THE PLATE MUST NOT BE REMOVED. 

 

 

THE APPLIANCE IS INTENDED FOR COMMERCIAL USE BY 
APPROPRIATELY TRAINED PERSONNEL.
 CHILDREN SHOULD 
ALWAYS BE KEPT OUT OF ITS REACH AND NEVER BE ALLOWED 
TO PLAY WITH IT. 

 

 

THE USE OF THIS APPLIANCE IS NOT PERMITTED TO PEOPLE 
(INCLUDING CHILDREN) OF REDUCED PHYSICAL AND MENTAL 
ABILITY, OR LACKING IN EXPERIENCE IN THE USE OF 
ELECTRICAL APPLIANCES, UNLESS THEY ARE SUPERVISED OR 
INSTRUCTED BY ADULTS OR PEOPLE RESPONSIBLE FOR THEIR 
SAFETY. 

 

BEFORE USE, THE OVEN DISHES MUST BE WASHED WITH A 
SUITABLE DISHWASHING DETERGENT (DO NOT USE ABRASIVE 
PRODUCTS). 

 

 

THE OVEN DIMENSIONS ARE DESIGNED FOR A MAXIMUM LOAD 
OF 3.5 KG. 

 
 

 

THIS APPLIANCE IS MARKED ACCORDING TO THE EUROPEAN 
DIRECTIVE 2002/96/EC ON WASTE ELECTRICAL AND ELECTRONIC 
EQUIPMENT (WEEE). 
THIS GUIDELINE IS THE FRAME OF A EUROPEAN-WIDE VALIDITY 
OF RETURN AND RECYCLING ON WASTE ELECTRICAL AND 
ELECTRONIC EQUIPMENT. 

 

 

BEFORE THE APPLIANCE IS PUT INTO OPERATION, ALL THE 
LABELS AND PROTECTIVE FILMS APPLIED INSIDE OR OUTSIDE 
MUST BE REMOVED. 

 

The manufacturer declines all responsibility 

for damage to persons 

or things caused by non-observance of the above prescriptions or by 

interference with any part of the appliance or by the use of non-original 
spares.

 

Summary of Contents for Commercial Oven ALFA41UK













Reviews: