20
Use of other descalers invalidates the guarantee.
Failure to descale the appliance as described also
invalidates the guarantee.
Over time, constant heating up of the water used
to make the coffee leads to limescale building up
in the inner circuits of the appliance.
When "DESCALE" is displayed, the machine re-
quires descaling.
Proceed as follows:
•
Make sure the appliance is ready for use and
the water softener filter (if present) has been
removed.
•
Press the MENU button (B6) then press the
NEXT button (B7) repeatedly until the ap-
pliance displays "DESCALE NO".
•
Press the CHANGE button (B8) and the ap-
pliance displays "DESCALE YES".
•
Press the OK button (B9). The message "ADD
DESCALER PRESS OK" is displayed.
•
Empty the water tank, pour the contents of
the descaler bottle into the tank respecting
the instructions given on the descaler pack,
then add water up to the MAX level marked
on the water tank.
When descaling subsequently, use descaler
of the same type and brand as supplied (avai-
lable from the manufacturer's authorised Cu-
stomer Services) or a descaler
recommended by Customer Services. Always
follow the instructions on the pack.
•
Place a container with a minimum capacity
of 1.5 litres under the cappuccino maker (fig.
3).
•
Press the OK button. Descaler flows out of
the cappuccino maker into the container
below. "APPLIANCE IN DESCALE" is displa-
yed.
•
The descale programme automatically per-
forms a series of deliveries and pauses to re-
move limescale deposits from inside the
machine.
•
After about 30 minutes, the appliance di-
splays "RINSING FILL TANK".
The appliance must now be rinsed through
to eliminate residues of descaling solution
from inside the appliance. Proceed as fol-
lows:
•
Empty the water tank, rinse and fill with clean
water.
•
Replace the tank;
•
Empty the full container and put back under
the cappuccino maker.
•
Press the OK button. Hot water flows out of
the cappuccino maker spout into the contai-
ner below and the appliance displays "RIN-
SING".
•
When the water tank is empty, the appliance
displays the message "RINSING COM-
PLETE... PRESS OK".
•
Press the OK button and refill the water tank
with clean water.
•
The descale programme is now terminated
and the appliance is ready to make coffee
again.
NOTE: If descaling is interrupted before com-
pletion, the machine still displays the desca-
ling message and the process must be begun
again from the beginning.
Empty the water tank, rinse with clean water
and deliver a cup of hot water.
Important! FAILURE TO DESCALE THE
APPLIANCE REGULARLY INVALIDATES THE
GUARANTEE.
Changing coffee temperature
To change coffee temperature, proceed as fol-
lows:
•
Press the MENU button (B6), then press the
NEXT button (B7) repeatedly until the ap-
pliance displays "TEMPERATURE HIGH...".
•
Press the CHANGE button (B8) until the ap-
pliance displays the required coffee tempe-
rature.
•
Press the OK button (B9) to confirm.
•
Press the MENU button to exit programming
mode or NEXT to change other parameters.
Changing the length of time the
appliance remains on (Energy
saving function)
The appliance is set by default to go off automa-
tically 1 hour after the last coffee has been made.
