Instructions for the installer
16
Complete wiring up to power supply with an appropriately rated five-core plug (see data plate) or, in case
of operation from a
220-240V
power supply, with a three-core plug. Make sure that plug and wall socket
are of the same type and are in conformity with regulations in force. Make sure that the appliance is
properly earthed. Before powering, check that the power line is properly earthed. Avoid using adapters
or shunters.
The manufacturer declines all responsibility
for damage to persons or things caused by non-
observance of the above prescriptions.
12.2 Wall fixing (where applicable)
In order to prevent accidentaltipping of the appliance, for example by a child climbing onto the
open oven door, a stabilizing means must be installed. Please refer to instructions for
installation.
12.3 Mounting the rear top skirtboard (where applicable)
• Loosen
nuts
B
.
• Position the skirt above the top, taking care to align
pins
C
with holes
D
.
• Secure the skirt to the top by tightening screws
A
.