1. Loosely release the screws
❶
,
❸
of the hinge on the case part
of the freezer and then
separate the door by pushing it
to the right (See Figure 23).
2. Release the No.
❶
,
❸
completely and then fix them
loosely to the reverse side (See
Figure 24)
3. Separate the hinge by releasing
the No.
❷
,
❹
bolt to the door.
4. Move the separated hinge
(Figure 24) diagonally and fix it
to the door by turning it 180˚.
5. Push the hinge from the left
side to the right side to ensure
that the door hinge and the
screws fixed to the case match.
6. Adjust the top/down or the
left/right interval of the
refrigerator door so that
leaning should not occur to
either side, and then tighten
screws.
7. If the hinge bolting is
completed, insert the
⑪
cap
screws at the opposit side of
the hinge (6 places).
※
Same as above order for change of the door open direction of the cold store room door.
※
Perform work after changing the door before installation.
(Fig. 23)
(Fig. 24)
6. Order of Installation
7) Change of Door Open Direction of Refrigerator
37
Summary of Contents for CB30PFNF
Page 22: ...P No MFL62525401 ...
Page 42: ...P No 3828JD8684J ...
