LIGHTS REPLACEMENT:
Before performing any cleaning and/or
maintenance operation, disconnect the hood
from the mains supply.
According to the model, the hood can be equipped
with different kind of lighting such as incandescent,
halogen and neon lamps.
a) Incandescent lamps:
E14 – 40W 230V lamps.
To replace them, remove the transparent fixture
from the control panel, unscrew the lamp and
screw in the new one.
b) Halogen lamps:
G4
, 20W - 12V
lamps
.
To
replace the lamp, use a screwdriver to remove
the glass-supporting ring. Then remove the old
lamp and insert the new one.
Put the glass back, securing it with the ring.
c) Biax neon lamps:
G23
11W
lamp. Once the
fixture has been removed, remove the biax lamp
from its seat and support.
Put a new lamp in, performing the same
operations backwards.
d) Neon lamp: 15/18W
neon tube
.
To reach the
neon tube, unscrew the glass framework screws.
Rotate the tube 90 degrees and remove the neon
lamp. Install the new neon tube and put the glass
framework back.
EN
07
WARRANTY AND TECHNICAL ASSISTANCE
SERVICE
The hood packaging includes, together with this operating and maintenance booklet, the
Smeg Warranty Booklet
. Please read the
Smeg Warranty Booklet
for complete
information about the warranty
(N.B. bulbs and filters are not covered by your warranty).
In the case of failure, please call
Customer Service
0870 9909907
and provide the following data:
•
The model indicated inside the hood (fig. 7)
•
Your full address
•
Your telephone number
•
Information on the kind of failure
•
Your proof of purchase
(a)
(b)
(c)
(d)
Fig.7