Smeg C3170F2P, User Manual

Page: 46 / 72

Problem Possible cause Solution
The door is not closed cor-
rectly. Refer to "Closing the door".
The food products' tem-
perature is too high. Let the food products tempera-
ture decrease to room temper-
ature before storage.
Many food products are
stored at the same time. Store less food products at the
same time.
The door has been opened
often. Open the door only if necessa-
ry.
There is no cold air circula-
tion in the appliance. Make sure that there is cold air
circulation in the appliance.
If the advice does not lead to
the desired result, contact the
nearest Authorised Service
Centre.
Replacing the lamp
1. Disconnect the plug from the mains
socket
2. At the same time, with the fingers
expand up and down the transparent
cover and unhook it in the direction of
the arrows.
1
1
2
3. Replace the lamp with one of the same
power and shape, specifically designed
for household appliances. (the
maximum power is shown on the light
bulb cover).
4. Reassemble the lamp cover.
5. Connect the plug to the mains socket.
Open the door. Make sure that the light
comes on.
Closing the door
1. Clean the door gaskets.
2.
If necessary, adjust the door. Refer to
"Installation".
3.
If necessary, replace the defective door
gaskets. Contact the Authorised
Service Centre.
INSTALLATION
Positioning
This appliance can be installed in a dry, well
ventilated indoor where the ambient
temperature corresponds to the climate
class indicated on the rating plate of the
appliance:
Cli-
mate
class Ambient temperature
SN +10°C to + 32°C
46