background image

Instructions

57

EN

1.2 Manufacturer’s liability

The manufacturer declines all liability 
for damage to persons or property 
caused by:
•  Use of the appliance other than 

that specified

•  Failure to comply with the 

instructions in the user manual

•  Tampering with any part of the 

appliance

•  The use of non-original spare 

parts.

1.3 Appliance purpose

• This appliance is intended for 

cooking food in the home 
environment. Every other use is 
considered improper.

• The appliance is not designed to 

operate with external timers or with 
remote-control systems.

1.4 Identification plate

The identification plate bears the 
technical data, serial number and 
brand name of the appliance. Do not 
remove the identification plate for 
any reason.

1.5 This user manual

This user manual is an integral part of 
the appliance and must therefore be 
kept in its entirety and within the 
user’s reach for the whole working 
life of the appliance.
Read this user manual carefully 
before using the appliance.

1.6 Disposal

This appliance conforms to the 
WEEE European directive 
(2012/19/EU) and must be 

disposed of separately from other 
waste at the end of its service life. 
The appliance does not contain 
substances in quantities sufficient to 
be considered hazardous to health 
and the environment, in accordance 
with current European directives.
To dispose of the appliance:
•  Cut the power supply cable and 

remove it.

Power voltage

Danger of electrocution

•  Disconnect the mains power 

supply.

•  Unplug the appliance.

Summary of Contents for BG91IX2

















































Reviews: