Smeg AS 61 E Product Manual Download Page 4

4 - EN

extended directly to the outdoors. There must 

be a small number of elbows as not to hinder 

air ventilation.

C

 The ventilation hose can be routed outdoors 

via a window or it can be connected to the air 

outlet in the bathroom.

C

 To prevent water accumulation in the hose, 

make sure that it is not folded on the floor.

B

 The air ventilation hose should not be 

connected to the chimney of a stove or a 

fireplace. 

B

 Pay attention that the air inlet openings are 

unobstructed.

B

 Do not operate your machine at the same 

time with heaters such as a coal or gas stove. 

Airflow may cause the chimney to flare up. 

Airflow may cause the chimney to flame up.

Connection to a water drain (for 

products equipped with a condenser)

In products equipped with a condenser unit the 

water accumulated during the drying cycle is 

collected in the water tank. You should drain the 

accumulated water after each washing cycle.

You can directly send the accumulated water 

out through the water drain hose supplied with 

the machine instead of periodically draining the 

water collected in the water tank.

Remove the hose on the machine by pulling it 

out from its end in order to make the water drain 

hose connection. Do not use any tools to take 

out the hose. Attach the drain hose adaptor to 

the end of this hose. Connect the special drain 

hose supplied with the machine to the hose 

adaptor fitting. The other end of the drain hose 

can be directly connected to the wastewater 

drain or to the washbasin. The fitting must 

always be secured in all types of connections. 

C

 When you direct the water drain out, “Water 

Tank” warning LED will light up at the end of 

each program.

•  The hose should be attached to a height of 

maximum 80 cm.

•  You must be careful not the pinch or bend the 

hose. 

Electrical connection

Connect the machine to an earthed outlet 

protected by a fuse of suitable capacity.

Important:

•  Connection should comply with national 

regulations.

•  Power cord plug must be within easy reach 

after installation.

•  The voltage and the allowed fuse protection 

are specified in the section “Technical 

Specifications”.

•  The stated voltage must match with your 

mains voltage.

•  Connection via extension cords or multi-plugs 

should not be made.

•  The main fuse and switches must have a 

contact distance of minimum 3 mm.

B

 A damaged power cable must be replaced by 

a qualified electrician.

B

 The appliance must not be operated unless it 

is repaired! There is the risk of electric shock!

Disposal

Packaging material can be dangerous to 

children. Keep the packaging materials out 

of the reach of children or dispose of them 

accordingly. Do not dispose them together with 

normal domestic wastes.

Disposing of the old machine

Dispose of your old appliance in an 

environmental friendly manner.

•  You may refer to your local agent or solid 

waste collection center in your municipality to 

learn how to dispose of your machine.  

Before disposing of your old machine, cut off the 

mains plug and make the door lock unusable, so 

children will not be endangered.

Summary of Contents for AS 61 E













Reviews: