Smeg ALFA420H Manual Download Page 8

Description

36

2.2 Control panel

1 Temperature knob

This knob allows you to select the cooking 
temperature.
Turn the knob clockwise to the required 
value, between the minimum and maximum 
setting.

2 Thermostat indicator light

When the indicator light is fixed, it indicates 
that the oven is heating up to reach the set 
temperature. Once the temperature has 
been reached, the indicator light comes on 
and goes off to indicate that the 
temperature is being kept constant.

3 Humidification knob

Dispenses steam to improve cooking. Turn 
the knob clockwise to the 

1

 position. Steam 

will be dispensed until the knob is released.

5 Timer indicator light

When off, it indicates the beginning of 
timed cooking. When on, it indicates that 
timed cooking has finished.

6 Timer knob

This knob allows you to select manual or 
timed cooking. Turn the knob to the 
symbol 

 

for manual cooking or to the 

numbers to select the minutes of cooking. 
Once the countdown has finished, the knob 
will automatically return to the “

0

” position, 

the oven switches off and a beep sounds to 
indicate the end of cooking.

For humidified cooking, place the 
function/temperature knob at a 
temperature greater than 

150°C

.

Summary of Contents for ALFA420H



























Reviews: