Smeg A42C, Instruction Manual

Page: 10 / 29

Instructions for the user
36
Double heating
The circle next to each knob
indicates the cooking zone it
controls. To heat the inner cooking
zone, turn the knob to the desired
position (
1 to 9 ).
To heat both the inner and outer cooking zones, turn the knob to or ;
and then release. The knob will thus return to 9 . To adjust heating
intensity, rotate the knob anticlockwise to the desired position. To return
to heating of the inner cooking zone only, set the knob back to
0 and then
turn to the desired position ( 1 to 9 ). To switch off, return knob to 0 .
MAIN OVEN THERMOSTAT KNOB
Selection of cooking temperature is carried out by
turning the knob clockwise to the required
temperature, between 50° and 250°C.
The tell-tale light comes on to indicate that the
oven is Warming up. When it goes out it means
that the required temperature has been reached..
Intermittent going on and off of the light means that oven temperature is
being constantly maintained at the programmed level.
The oven is switched on by turning the knob clockwise to any one of the
following functions except the oven light:
NO FUNCTION SET GRILL E
VENTILATION (SPIT)
OVEN LIGHT (NO ELEMENT
ENGAGED)
GRILL ELEMENT (SPIT)
VENTILATED HEATING
E VENTILATION
50
÷
250 °C
DEFROSTING
(NO HEATING ELEMENT
ENGAGED)