20
INSTALLATION
COMPLY WITH THE DIMENSIONS
(mm)
A
B
C
D
E
EL. HOB 30
282
482
59
59
100 min.
FIG. 6
FIG. 7
TECHNICAL INFORMATION
FOR THE INSTALLER
Installation, transformations and maintenances
below listed, may only be carried out by a
competent technician.
The appliance must be correctly installed in
conformity with current law and the
manufacturer's instructions.
Incorrect installation may cause damage to
persons, animals or property for which the
Manufacturer shall not be considered
responsible.
During the life of the system, the automatic
safety or regulating devices on the appliance
may only be modified by the manufacturer or
by his duly authorized dealer.
3) INSERTING
Check that the appliance is in a good condition
after having removed the outer packaging and
internal wrappings from around the various loose
parts. In case of doubt, do not use the appliance
and contact qualified personnel.
Never leave the packaging materials
(cardboard, bags, polystyrene foam, nails, etc.)
within children’s reach since they could
become potential sources of danger.
The measurements of the opening made in the top
of the modular cabinet and into which the hot plate
will be installed are indicated in either fig. 6.
Always comply with the measurements given for
the hole into which the appliance will be recessed
(see fig. 6 and 7).
