background image

155620

155620

for certain programs this function is available also 

for washing. Appropriately larger quantity of water is 

indicated by the display.

Cold wash

For washing less soiled or colour-sensitive clothes.

Upon switching this function ON, the heating 

function of this cycle is switched OFF, therefore the 

whole program is adequately shortened.

Each temperature related to a particular program 

(wool, cotton, delicates, etc.) corresponds to a 

particular period of cold wash. To select the desired 

program use knob B and select the cold wash. Then 

turn knob A to set the pointer to the temperature of 

the desired program corresponding to the relevant 

washing time, according to the chart below. 

Washing time (minutes)

Programs

Normal

Cold

cotton

95

139

101

cotton

60

119

86

cotton

40

121

71

synthetics

60

106

67

synthetics

40

95

67

synthetics

30

73

57

delicate

40

59

46

delicate

30

53

46

wool

40

51

40

wool

30

46

40

manual wash

30

47

43

jogging

40

44

/

mix

30

72

/

 Pre-wash

Used for washing heavily stained laundry, especially 

with superficial stains. In default setting the pre-

wash function is off. It is activated by pressing the 

16

17

Summary of Contents for 155620





































Reviews: