Name of part
Description
No.
⑨
(
＋
) Up
The Flash output level increases (
＋
) 0.1 stop each by single-pressing this button.
In TTL mode, the flash exposure compensation will be adjustable in +/-0.1 ~3.
⑩
(
－
) Down
The Flash output level decreases (
－
) 0.1 stop each by single-pressing this button.
In TTL mode, the flash exposure compensation will be adjustable in +/-0.1 ~3.
⑨+⑩
Exposure
Compensation
Value Delete
Press and hold
⑨
(
＋
)Up and
⑩
(
－
)Down simultaneously then the exposure compensation data
is deleted and displayed at +00.
⑪
Power
Push the power button to turn it on. Press the button again to power off.
⑫
2.5mm Sync Jack
If your camera does not have a Hot shoe, it can be connected to the camera using 2.5mm sync
jack cable.
⑬
Camera Selection FlashWave-5 has two different types based on camera brand eg. Canon, Nikon.
Default Setting
· Press
①
“Mode” button for 2 seconds, the unit will return to factory defaults which are;
TTL Mode/+00 / Channel no.1 / Group A / LED Modeling OFF
Flash Control OFF
· Press and hold the desired group button on the FlashWave-5 Transmitter for 2 seconds.
The flash with the corresponding group selected on the transmitter will be OFF. Press the button again to turn it on.
Limited Warranty
SMDV provides limited warranty on this product for one year from date of purchase from an authorized dealer.
SMDV will at its option, repair or replace any eligible product that become defective within the warranty period.
Damage or failure which results from misuses, neglect, accident, alteration, abuse, improper installation or maintenance are excluded.
Defective units should be returned to us with a detailed note describing the defects.
Address. (46901) 1532 Nakdongdae-ro, Sasang-Gu, Busan, Korea
T. +82-51-324-0788 | F. +82-51-301-0788 | Website. www.smdv.co.kr | E-mail. [email protected]
Summary of Contents for Flash Wave-5TX
Page 1: ...www smdv co kr User Guide...
