SMC Sierra Monitor FieldServer FS-8700-125 Stulz, Manual, Page: 8 / 16

Stulz Driver Manual
Page 8 of 16
4.2 Client Side Node Parameters
Section Title
Nodes
Column Title Function Legal Values
Node_Name Provide name for node.
Up to 32 alphanumeric
characters
Node_ID Modbus station address of physical Server node. 1-32
Protocol Specify protocol used. Stulz
Connection
Specify which port the device is connected to the
FieldServer.
R1-R2
1
Example
// Client Side Nodes
Nodes
Node_Name , Node_ID , Protocol , Connection
SATS1
,1 , Stulz , R1
4.3 Client Side Map Descriptor Parameters
4.3.1 FieldServer Related Map Descriptor Parameters
Column Title Function Legal Values
Map_Descriptor_Name Name of this Map Descriptor.
Up to 32 alphanumeric
characters
Data_Array_Name
Name of Data Array where data is to be
stored in the FieldServer. One of the Data Array names
from
Section 3
Data_Array_Offset Starting location in Data Array.
0 to maximum specified in
Section 3
Function Function of Server Map Descriptor.
RDBC, WRBX, WRBC,
Passive_client
Scan_Interval Buffers Update Period. > 0.001s
4.3.2 Driver Specific Map Descriptor Parameters
Column Title Function Legal Values
Node_Name Name of Node.
One of the Node names
specified in
Section 4.2
Length Length of Map Descriptor.
When using PASSIVE_CLIENT
function, length is 1;
For Active Map Descriptors use
a length up to 232, depending
on command
Stulz_Command
Specifies the command to be read from the
device. In order to read data a legal LS
command is needed.
Specified in Appendix A