１０
5. Description of operation
1. Check the wiring before supplying power.
1) Number of output
Set the rotary switch for output setting to the number of valves to be used.
(0 indicates 10 outputs)
Setting is read when powered or one cycle is completed.
①
”1” is specified
②
”3” is specified
2
）
Setting the number of energizations (1 or 2).
Determine which valves to have 1 or 2 outputs,
and set the dip switch for the correct setting.
(ON: twice, OFF side: once)
①
When there are 4 outputs and “1” and ”3” are energized twice.
Fig. 4
Fig. 5 Sequence
Fig. 6 Sequence
Fig. 8 Sequence
No output
No output
No output
No output
ONt: ON time setting
OFFt: OFF time setting
Fig.7
