18
Figure 4-4 More setting—WEP
¾
SSID:
Enter the SSID of the network. The SSID is a unique name shared among all
points in your wireless network. The SSID must be identical for all points in the network,
and is case-sensitive. Place a check in the
any
box if you would like the device to
connect to the first available Access Point with the strongest signal.
¾
Network Type:
Select a network type from the drop-down list.
¾
Infrastructure
or
Ad-hoc:
If you select infrastructure, the device must be connected to
an Access Point. If you select ad-hoc, you may connect the device to another WLAN
client adapter (such as this one).
¾
Authentication:
Select an authentication type from the drop down list. Options
available are:
Auto, Open System, Shared Key, WPA, WPA-PSK, WPA2,
WPA2-PSK
.
¾
Encryption:
Select an encryption type from the drop-down list. Options available are:
Disable, WEP, TKIP, AES
.
Note:
Refer to the
WEP encryption
and
WPA encryption
sections in this chapter to
configure the security settings.
Summary of Contents for SMCWUSB-G2
