SMC Networks SMCD3GNV, User Manual, Page: 94 / 217

Configuring the
Gateway
94
SMCD3GNV Wireless Cable Modem Gateway User Manual
Troubleshooting the Gateway
Using the
Troubleshooting
menu, you can:

Define log filters. See page 94.

Test connectivity to a destination or IP address. See page 96.

Reset the Gateway, reset your Wi-Fi router, or restore the Gateway to its factory default
settings. See page 98.

Change the password used to log in to the Gateway’s Web interface. See page 99.
Note:
For additional troubleshooting procedures, see Chapter 6.
Defining Log Filters
Using the Logs menu, you can define the filters applied to the Gateway’s system, event, and
firewall logs. You can also specify the timeframe to be covered by the logs, as well as
download and print the logs.
To display the Logs menu, click
Troubleshooting
in the menu bar, and then click the
Logs
submenu in the menu bar. Figure 52 shows an example of the menu.
Figure 52. Example of the Logs Menu