Configuring the
Gateway
91
SMCD3GNV Wireless Cable Modem Gateway User Manual
Enabling or Disabling Port Blocking
By default, all four Ethernet ports on the Gateway are enabled and configured to auto-
negotiate the highest speed and duplex settings. If these settings prevent the Gateway from
connecting with other devices, you can use the Port Blocking menu to configure the
Gateway’s Ethernet ports to use specific speed and duplex settings. The Port Blocking menu
also let you disable the Ethernet ports. Each port can be configured or disabled
independently of the other Ethernet ports on the Gateway.
To display the Port Blocking menu, click
Advanced
in the menu bar, and then click the
Port
Blocking
submenu in the menu bar. Figure 50 shows an example of the menu.
Figure 50. Example of Port Blocking Menu
To change a port from its default settings, perform the following procedure on the row that
corresponds to the Ethernet port you want to configure.
1. Under the
Auto Negotiate
column, select
No
.
2. Under the
Mode
column, select
Full
for full-duplex or
Half
for half-duplex to force the
selected port to use the duplex setting you select.
3. Under
Speed
, select the fixed speed that the port will use.
4. To disable the port, check the checkbox in the
Disable Port
column.
5. Click the
SAVE
button.
