SMC Networks SMCD3GNV, User Manual, Page: 149 / 217

Configuring the
Gateway’s mso Interface
149
SMCD3GNV Wireless Cable Modem Gateway User Manual
Specifying Services to be Blocked
To block services for non-trusted computers, perform the following procedure from the
Managed Services menu.
1. Next to
Enable Managed Services
, click
Enabled
.
2. Under
Blocked Services
, click
ADD
. The Add Blocked Service menu appears (see Figure
88).
3. Complete the fields in the Add Blocked Service menu (see Table 44).
4. Click
SAVE
(or click
CANCEL
to discard your settings). If you clicked
SAVE
, the blocked
service appears below
Blocked Services
on the Managed Services menu.
5. To block additional services, repeat steps 2 through 4.
6. To edit a blocked service, click the
EDIT
button next to the blocked service you want to
modify, edit the settings on the Add Blocked Service menu (see Table 44), and click
SAVE
.
7. To delete a blocked service, click the
X
next to the service. When the Delete Service Block
Rule message appears, click
OK
to delete the blocked URL or
CANCEL
to retain it. If you
clicked
OK
, the service is removed from
Blocked Services
on the Managed Services
menu.